On Mon, Jan 27, 2003 at 10:18:48PM +0100, Toni Schmidbauer wrote:
> got no useful response from -mobile so re-posting to -current:
> i am having problems with 5.0-REL on an ibm thinkpad 600x.the xl
> driver for my 3com 3ccfe575ct writes the following message to the
> console "xl0: watchdog timeout".
> after skimming through newsgroups i found out that it has
> something to the with irq mapping. the cardbus controller uses
> irq11. my first try was to disable the usb-controller because it
> uses irq11 too. no luck!
> a boot -v shows me that a hole bunch of pci devices uses irq11...
> the problem is that the network connection is _very_ slow. i
> think its because of the irq conflict. had anyone the same
> problems before?
> i also tried a different card (3com 3cxfe575bt) - same effect.
> removing the card from the pcmcia slot prompts:
> "xl0: command never completed!" and
> "xl0: reset didn't complete"
> find attached:
> - pciconf -v -l
> - boot -v with usb
> - boot -v w/o usb
> thanks for any help
Try to add hw.pci.allow_unsupported_io_range="1" in your
/boot/loader.conf.local and reboot your machine.
Rgdz, /"\ ASCII RIBBON CAMPAIGN
Sergey Osokin aka oZZ, \ / AGAINST HTML MAIL
http://ozz.pp.ru/ X AND NEWS
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message