Essenz Consulting writes:
> I posted this awhile back I didnt get much response.
> Basically, I have a machine with FreeBSD 4.0-RELEASE.
> Every couple of days it reboots for now reason. When I looked at the logs,
> it shows regular log data, then the next line reads "/kernel: Copyright
> (c) 1992-2000 The FreeBSD Project.
> Then the standard kernel stuff gets listed. At the end of the kernel data
> is says WARNING: / was not properly dismounted. There is nothing before
> the kernel data about shutting down or rebooting.
> I have an Intel PRO/100+ network card, U2W scsi. Has anybody encountered
> something like this? This same hardware configuration has no problems with
> other versions of FreeBSD, could it be a 4.0 problem.
> Any help would be great. Thanks.
I see it on 3.3-R and 3.4-R,
it is rare on 4.0-R and almoust absent on
FreeBSD badaxe.duty.ru 4.0-STABLE FreeBSD 4.0-STABLE #0: Sun May 7 21:12:08 MSD 2000 firstname.lastname@example.org:/usr/src/sys/compile/badaxe i386
but still occur sometimes
: ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0x6c00-0x6cff mem 0xe0420000-0xe0420fff irq 11 at device 8.0 on pci0
: ahc0: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs
: xl0: <3Com 3c905-TX Fast Etherlink XL> port 0x7400-0x743f irq 9 at device 10.0 on pci0
: xl0: Ethernet address: 00:60:97:5d:a2:7d
: miibus0: <MII bus> on xl0
: nsphy0: <DP83840 10/100 media interface> on miibus0
: nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
: xl0: supplying EUI64: 00:60:97:ff:fe:5d:a2:7d
: CPU: AMD-K6(tm) 3D+ Processor (400.91-MHz 586-class CPU)
: Origin = "AuthenticAMD" Id = 0x591 Stepping = 1
: AMD Features=0x80000800<SYSCALL,3DNow!>
AMD-K6-III processor and
: pcib1: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device 1.0 on pci0
: isab0: <VIA 82C586 PCI-ISA bridge> at device 7.0 on pci0
: atapci0: <VIA 82C586 ATA33 controller> port 0x6400-0x640f at device 7.1 on pci0
: chip1: <VIA 82C586B ACPI interface> at device 7.3 on pci0
VIA MVP3 chipset on PA-2013 mainboard
but I now noticed that PA-2013 have special revision to work
with AMD-K6-400 I have not.
there is sometimes
Apr 8 17:53:29 cicuta /kernel: (da0:ahc0:0:0:0): data overrun detected in Data-in phase. Tag == 0xb.
Apr 8 17:53:29 cicuta /kernel: (da0:ahc0:0:0:0): Have seen Data Phase. Length = 8192. NumSGs = 1.
Apr 8 17:53:29 cicuta /kernel: sg - Addr 0x58ed000 : Length 8192
messages in addition to locks.
I have no troubles at all with this hardware and 2.2.7-RELEASE
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-hackers" in the body of the message