82574 is supposed to be em, not igb :) Its always had this kind of
status, it was targeted as a 'client' or consumer part, but it has MSIX
make it almost like 8257.
Mike, there are some further 82574 changes to shared code that I'm looking
On Tue, Nov 23, 2010 at 10:17 AM, Mike Tancsa <email@example.com> wrote:
> On 11/23/2010 12:39 PM, Sean Bruno wrote:
> > On Tue, 2010-11-23 at 04:47 -0800, Ivan Voras wrote:
> >> It looks like I'm unfortunate enough to have to deploy on a machine
> >> which has the 82574L Intel NIC chip on a Supermicro X8SIE-F board, which
> > igb0@pci0:5:0:0: class=0x020000 card=0x8975152d chip=0x10c98086
> Strange, the 82574 attaches as em for me, not igb
> em1@pci0:10:0:0: class=0x020000 card=0x34ec8086 chip=0x10d38086
> rev=0x00 hdr=0x00
> vendor = 'Intel Corporation'
> device = 'Intel 82574L Gigabit Ethernet Controller (82574L)'
> class = network
> subclass = ethernet
> cap 01[c8] = powerspec 2 supports D0 D3 current D0
> cap 05[d0] = MSI supports 1 message, 64 bit enabled with 1 message
> cap 10[e0] = PCI-Express 1 endpoint max data 128(256) link x1(x1)
> cap 11[a0] = MSI-X supports 5 messages in map 0x1c
> ecap 0001 = AER 1 0 fatal 0 non-fatal 0 corrected
> ecap 0003 = Serial 1 001517ffffed68a4
> Normally, its msix, but I had disabled that hoping it would fix the problem
> em1: <Intel(R) PRO/1000 Network Connection 7.1.7> port 0x2000-0x201f mem
> 0xb4100000-0xb411ffff,0xb4120000-0xb4123fff irq 16 at dev
> ice 0.0 on pci10
> em1: Using an MSI interrupt
> em1: [FILTER]
> em1: Ethernet address: 00:15:17:ed:68:a4
> firstname.lastname@example.org mailing list
> To unsubscribe, send any mail to "email@example.com"