Richard Walter wrote:
> Hello,
>
> I have attached my console at the serial port at the backside of the
> machine (console IOIOIO). There is an auxiliary serial port too and a
> vga port.
>
> Where can i look for the vendor or divice ID, i have attached some outputs:
At the risk of putting words into Marcel's mouth I would guess here.
Notice the vendor and device id columns. Of course I'm nto 100% certain
that is showing the uarts :)
> Seg Bus Dev Fnc Vendor Device Slot
> # # # # ID ID # Path
> --- --- --- --- ------ ------ --- -----------
> 00 00 01 00 0x103C 0x1303 XX
> Acpi(HWP0002,PNP0A03,0)/Pci(1|0)
> 00 00 01 01 0x103C 0x1302 XX
> Acpi(HWP0002,PNP0A03,0)/Pci(1|1)
> 00 00 01 02 0x103C 0x1048 XX
> Acpi(HWP0002,PNP0A03,0)/Pci(1|2)
> 00 00 02 00 0x1033 0x0035 XX
> Acpi(HWP0002,PNP0A03,0)/Pci(2|0)
> 00 00 02 01 0x1033 0x0035 XX
> Acpi(HWP0002,PNP0A03,0)/Pci(2|1)
> 00 00 02 02 0x1033 0x00E0 XX
> Acpi(HWP0002,PNP0A03,0)/Pci(2|2)
> 00 00 03 00 0x1002 0x515E XX
> Acpi(HWP0002,PNP0A03,0)/Pci(3|0)
> 00 01 01 00 0x1000 0x0054 XX
> Acpi(HWP0002,PNP0A03,200)/Pci(1|0)
> 00 01 02 00 0x14E4 0x1648 XX
> Acpi(HWP0002,PNP0A03,200)/Pci(2|0)
> 00 01 02 01 0x14E4 0x1648 XX
> Acpi(HWP0002,PNP0A03,200)/Pci(2|1)
If it helps, I can product some lspci output from an rx2660 running "Linux"
rick jones