On Apr 5, 2007, at 10:00 AM, Rick Jones wrote:
> Richard Walter wrote:
>> Hello,
>> I have attached my console at the serial port at the backside of
>> the machine (console IOIOIO). There is an auxiliary serial port
>> too and a vga port.
>> Where can i look for the vendor or divice ID, i have attached some
>> outputs:
>
> At the risk of putting words into Marcel's mouth I would guess
> here. Notice the vendor and device id columns. Of course I'm nto
> 100% certain that is showing the uarts :)
>
>> Seg Bus Dev Fnc Vendor Device Slot
>> # # # # ID ID # Path
>> --- --- --- --- ------ ------ --- -----------
>> 00 00 01 00 0x103C 0x1303 XX Acpi
>> (HWP0002,PNP0A03,0)/Pci(1|0)
>> 00 00 01 01 0x103C 0x1302 XX Acpi
>> (HWP0002,PNP0A03,0)/Pci(1|1)
>> 00 00 01 02 0x103C 0x1048 XX Acpi
>> (HWP0002,PNP0A03,0)/Pci(1|2)
See the PCI ID repository on SourceForge:
HP = 0x103c
Diva = 0x1048
Richard's original email had:
P Serial Acpi(HWP0002,PNP0A03,0)/Pci(1|2) Vt100+ 9600
S VGA Acpi(HWP0002,PNP0A03,0)/Pci(3|0)
It shows that the serial console is on PCI(1|2), which matches
the IDs.
Unfortunately, we already have those IDs. What we don't have are the
right sub-vendor and sub-device IDs :-(
Rick, could you run the lspci on Linux for me, provided you have the
same management board?
If it's safe to do, then I can also add a catch-all. However, It would
only be save to enable the first 2 ports and I don't know if there
console is typically on either of those two...
Anyway... This is what we current have in FreeBSD:
Vendor Device Subven Subdev Description
------ ------ ------ ------ -----------
0x103c, 0x1048, 0x103c, 0x1049, "HP Diva Serial [GSP] Multiport UART
- Tosca Console"
0x103c, 0x1048, 0x103c, 0x104a, "HP Diva Serial [GSP] Multiport UART
- Tosca Secondary"
0x103c, 0x1048, 0x103c, 0x104b, "HP Diva Serial [GSP] Multiport UART
- Maestro SP2"
0x103c, 0x1048, 0x103c, 0x1223, "HP Diva Serial [GSP] Multiport UART
- Superdome Console"
0x103c, 0x1048, 0x103c, 0x1226, "HP Diva Serial [GSP] Multiport UART
- Keystone SP2"
0x103c, 0x1048, 0x103c, 0x1282, "HP Diva Serial [GSP] Multiport UART
- Everest SP2"
Thanks,
--
Marcel Moolenaar
xcllnt@mac.com