At 04:39 PM 3/7/00 -0600, Kevin Day wrote:
> > Greets:
> > Vinum simple config uses 256k stripe sizes. However, the examples in _The
> > Complete FBSD_ and Greg's web pages use 512k stripe size. It doesn't
> > appear that this will make a whole lot of difference one way or the other,
> > but I am curious about what others are using. This application is for
> > stripped mirror on four 9GB drives.
> > Thanks for your output-- Ken
>Actually, I discovered that with 4 drives, you're much better off using an
>odd stripe size. (not a power of two) This is because of how the cylinder
>groups are laid out, they'll all end up on one drive.
>You may want to ask Greg Lehey (email@example.com) for more info about this, as
>I can't remember exactly what he came up with for an optimum stripe size.
I figured he'd end up seeing this and I didn't want to bug him at his
private address;) The docs suggest 256k to 512K. I thing I read somewhere
to use 512 with larger drives, but cannot recall precisely where. BTW,
this is for a web hosting box. I could probably get by with RAID-1, but
figured I might as well go with RAID-10 since I have the drives to spare.
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-isp" in the body of the message