Re: 5.2-CURRENT still not working on my mitac 8080

From

David W. Chapman Jr. <dwcjr@inethouston.net>

Date

14 Jul 2004 18:58:30

Subject

Re: 5.2-CURRENT still not working on my mitac 8080

Message-ID

40F58207.3010903@inethouston.net

In reply to

John Baldwin, John Baldwin, John Baldwin (freebsd-current)

References to

David W. Chapman Jr. (freebsd-current) , David W. Chapman Jr., David W. Chapman Jr., David W. Chapman Jr. (freebsd-current) , John Baldwin, John Baldwin, John Baldwin (freebsd-current)

Replies

John Baldwin, John Baldwin (freebsd-current) , John Baldwin

Referenced by

John Baldwin (freebsd-current) , John Baldwin, John Baldwin, David W. Chapman Jr. (freebsd-current) , David W. Chapman Jr., David W. Chapman Jr.

[ Hide this part ]

 
 
John Baldwin wrote:
 
>On Wednesday 14 July 2004 09:25 am, David W. Chapman Jr. wrote:
>
>
>>When I boot in safe mode here is the console output
>>
>>pir0: <PCI Interrupt Routing Table: 9 Entries> on motherboard
>>$PIR: BIOS IRQ 10 for 1.4.INTA does not match link 0x61 irq 5
>>pci0: <PCI bus> on pcib0
>>
>>
>
>Look for a BIOS upgrade.  It sounds like your BIOS has badly busted interrupt
>routing.
>
>
>
I think I can get one, I don't have a problem running 4.X though, would
that be consistent with the problem you described?