What about for a front-end on this (mythtv, Freevo)?
Currently I'm going to do recording on a different machine (till I can get a
350PVR) and just wanna build out the watching portion with a menuing system
[mailto:email@example.com] On Behalf Of Tim Aslat
Sent: Thursday, October 21, 2004 6:39 PM
Subject: Re: Question for PVR
In the immortal words of "Mark Beaver" <firstname.lastname@example.org>...
> What software is the most reliable for recording and playing back (not
> necessarily the same) and the front end.
Depends on your hardware. If you have a Hauppauge PVR 250/350 and John
Wehle's driver port installed, then you can just use "dd" from the raw
device and have a very clean MPEG2 stream. On the other hand, if you
have a capture card based on the BrookTree chipsets, then you can use
mencoder/mplayer or fxtv for viewing/capture and playback.
> I've still considering my options for the project, and want to base my
> info off of that.
My personal recommendation is go for the Hauppauge cards, I have a PVR
350 and it just works beautifully.
Also, try searching the list archives. This has been discussed quite a
bit over the past year or so.
Tim Aslat <email@example.com>
Phone: +61 0401088479
firstname.lastname@example.org mailing list
To unsubscribe, send any mail to