Been searching mailling lists and reading the FBSD documentation, but
couldn't find an answer. I'm hoping this list can point me in the
I have a client that wants a raid 6 array, w/ 6 x 750G drives (i.e.
The machine has a 'HP Smart Array P400' controller (ciss), which we use
quite often, just not on an array of this magnitute before.
Configuring the array through the raid bios is pretty simple as it's
just like any other you would setup. However, the kernel is unable to
`attach` the device as is. I am wondering if a) anyone has run into
this issue before, and/or b) knows of any good workaround.
Here are errors from the logs:
Mar 6 01:58:40 store1 kernel: (da1:ciss0:0:1:0): got CAM status 0x4
Mar 6 01:58:40 store1 kernel: (da1:ciss0:0:1:0): fatal error, failed to
attach to device
Mar 6 01:58:40 store1 kernel: (da1:ciss0:0:1:0): lost device
Mar 6 01:58:40 store1 kernel: (da1:ciss0:0:1:0): removing device entry
Some things I have tried:
2 raid5 arrays w/ gstripe - This yields a usable 3Terabyte partition but
this isn't an option due to client restrictions.
zfs - works like a charm, but client unwilling to use something 'new'.
Restrictions can sometimes be a pain I tell ya.
I should mention the mahcine is amd64, not sure if this has any relavance.