SMP and mpfps Base Table HOSED!

[ Available lists | Index of freebsd-smp | Month of Sep 2002 | Week of 26 Sep 2002 | Raw email | View thread | Wrap long lines | Reply | Tag ]
From
Jess Fiorelli <jfiorelli@schwartz-pr.com>
Date
26 Sep 2002 06:45:59
Subject
SMP and mpfps Base Table HOSED!
Message-ID
4.3.2.7.2.20020926085317.02f2f010@ignatius.schwartz-pr.com

Replies

[ Hide this part ]
Hello everyone.  Here's my third try to see if anyone has any ideas about
what could be happening.. I appreciate all of the suggestions I've gotten
so far, but haven't made any progress. I've got an Intel L440GX+
motherboard with two Pentium III 1ghz processors that I can't seem to get
working with SMP and FreeBSD 4.6-stable. I keep getting this message when
I boot a kernel with SMP enabled:

Panic: mpfps Base Table HOSED!
mplock=0000000b; cpuid=0; lapic.id=00000000

I originally thought that my motherboard was defective, so I got another
one and got two new processors. That didn't help. Neither did switching
out the ram. Nor did
recompiling a new version of the GENRIC kernel with only the SMP options
changed. Neither did switching the MPS on the bios from 1.4 to 1.1. And
finally, upgrading the bios etc didn't help either.

Here's what mptable responds with (it doesn't look right to me- see oem ie
and product id):

[root@ignatius:/usr/local/etc/mail] # mptable

======================================================

MPTable, version 2.0.15

-------------------------------------------------------------------------------

MP Floating Pointer Structure:

location: BIOS
physical address: 0x000f6ab0
signature: '_MP_'
length: 16 bytes
version: 1.4
checksum: 0x42
mode: Virtual Wire

-------------------------------------------------------------------------------

MP Config Table Header:

physical address: 0x0009f560
signature: ''
base table length: 73
version: 1.2
checksum: 0x02
OEM ID: ''
Product ID: '
'
OEM table pointer: 0x00490e00
OEM table size: 0
entry count: 70
local APIC address: 0xac54b0a1
extended table length: 8
extended table checksum: 2

-------------------------------------------------------------------------------

MP Config Base Table Entries:

--
Processors: APIC ID Version State Family Model Step Flags
--
Bus: Bus ID Type
--
I/O APICs: APIC ID Version State Address
--
I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#
--
Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#

-------------------------------------------------------------------------------

MP Config Extended Table Entries:

Extended Table HOSED!
=================================================

Could there be something wrong with the case? I think it's the Astor II
with the built in Hotswap RAID, but that seems unlikely to be the problem,
since it works so well when SMP is not enabled.

Any help would be appreciated, as I'd love to get this second processor
working.
thanks


Jess


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-smp" in the body of the message



Elapsed time: 0.125 seconds