System: FreeBSD 6.2-STABLE i386 SMP
MOBO: Intel 946GZIS + 3.2Ghz Pentium D + 2G memory
I just finally managed to muddle through the upgrade to xorg 7.2.
(Though not noted in the docs in /usr/ports/UPDATING, I had to
do a 'make install' for /usr/ports/x11/xorg to get the installation
to complete after the upgrade. Without this step, I had no video,
mouse, or keyboard drivers. I had installed X originally from the
6.2-RELEASE CD so I guess I assumed - wrongly - that the upgrade
would pickup everything needed. Is this normal or did I miss a
step somewhere along the way?)
Three problems remain:
1) After doing the portupgrades as explained in the doc, I ran it
one last time to make sure all was well and saw this:
Stale dependency: xf86-input-acecad-1.1.0 --> xkeyboard-config-0.9_2
-- manually run 'pkgdb -F' to fix, or specify -O to force.
Is this significant and/or what causes it/fixes it? I am new
to portupgrade, having always done this sort of thing by hand
in the past.
2) When I startup X - especially with xfce4 - now and then, the background
will come up and the screen will do a sort of slow flash - about
once a second. If I kill the X server and restart, the problem
goes away and I get normal operation.
3) Things work OK with VESA driver, but I cannot seem to get things to
work with the i810 driver (Intel 946GZIS mobo + 3.2Ghz Pentium D):
Release Date: 22 January 2007
X Protocol Version 11, Revision 0, Release 7.2
Build Operating System: FreeBSD 6.2-STABLE i386
Current Operating System: FreeBSD troll.tundraware.com 6.2-STABLE FreeBSD 6.2-ST
ABLE #2: Mon May 28 02:01:41 CDT 2007 firstname.lastname@example.org:/usr/obj/usr
Build Date: 28 May 2007
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue May 29 00:00:01 2007
(==) Using config file: "/etc/X11/xorg.conf"
(EE) GARTInit: Unable to open /dev/agpgart (No such file or directory)
(EE) I810(0): Failed to allocate framebuffer. Is your VideoRAM set too low ??
Fatal server error:
AddScreen/ScreenInit failed for driver 0
X connection to :0.0 broken (explicit kill or server shutdown)
Ideas and suggestions welcome and TIA,
Tim Daneliuk email@example.com
PGP Key: http://www.tundraware.com/PGP/